Products: Abaqus/Standard Abaqus/CAE
This section provides a reference to the axisymmetric membrane elements available in Abaqus/Standard.
Coordinate 1 is r, coordinate 2 is z. At , the r-direction corresponds to the global X-direction and the z-direction corresponds to the global Y-direction. This is important when data are required in global directions. Coordinate 1 should be greater than or equal to zero.
Degree of freedom 1 is , degree of freedom 2 is . Generalized axisymmetric elements with twist have an additional degree of freedom, 5, corresponding to the twist angle (in radians).
Abaqus/Standard does not automatically apply any boundary conditions to nodes located along the symmetry axis. You must apply radial or symmetry boundary conditions on these nodes if desired.
Point loads and moments should be given as the value integrated around the circumference; that is, the total value on the ring.
Input File Usage: | *MEMBRANE SECTION |
In addition, use the following option for variable thickness membranes: *NODAL THICKNESS |
Abaqus/CAE Usage: | Property module: Create Section: select Shell as the section Category and Membrane as the section Type |
You cannot define variable thickness membranes in Abaqus/CAE. |
Distributed loads are specified as described in “Distributed loads,” Section 34.4.3.
Load ID (*DLOAD): BR
Abaqus/CAE Load/Interaction: Body force
Units: FL–3
Description: Body force in the radial (1 or r) direction.
Load ID (*DLOAD): BZ
Abaqus/CAE Load/Interaction: Body force
Units: FL–3
Description: Body force in the axial (2 or z) direction.
Load ID (*DLOAD): BRNU
Abaqus/CAE Load/Interaction: Body force
Units: FL–3
Description: Nonuniform body force in the radial direction with magnitude supplied via user subroutine DLOAD.
Load ID (*DLOAD): BZNU
Abaqus/CAE Load/Interaction: Body force
Units: FL–3
Description: Nonuniform body force in the axial direction with magnitude supplied via user subroutine DLOAD.
Load ID (*DLOAD): CENT
Abaqus/CAE Load/Interaction: Not supported
Units: FL–4 (ML–3T–2)
Description: Centrifugal load (magnitude is input as , where is the mass density per unit volume, is the angular velocity). Since only axisymmetric deformation is allowed, the spin axis must be the z-axis.
Load ID (*DLOAD): CENTRIF
Abaqus/CAE Load/Interaction: Rotational body force
Units: T–2
Description: Centrifugal load (magnitude is input as , where is the angular velocity). Since only axisymmetric deformation is allowed, the spin axis must be the z-axis.
Load ID (*DLOAD): GRAV
Abaqus/CAE Load/Interaction: Gravity
Units: LT–2
Description: Gravity loading in a specified direction (magnitude input as acceleration).
Load ID (*DLOAD): HP
Abaqus/CAE Load/Interaction: Not supported
Units: FL–2
Description: Hydrostatic pressure applied to the element reference surface and linear in global Z. The pressure is positive in the direction of the positive element normal.
Load ID (*DLOAD): P
Abaqus/CAE Load/Interaction: Pressure
Units: FL–2
Description: Pressure applied to the element reference surface. The pressure is positive in the direction of the positive element normal.
Load ID (*DLOAD): PNU
Abaqus/CAE Load/Interaction: Not supported
Units: FL–2
Description: Nonuniform pressure applied to the element reference surface with magnitude supplied via user subroutine DLOAD. The pressure is positive in the direction of the positive element normal.
Load ID (*DLOAD): TRSHR
Abaqus/CAE Load/Interaction: Surface traction
Units: FL–2
Description: Shear traction on the element reference surface.
Load ID (*DLOAD): TRSHRNU(S)
Abaqus/CAE Load/Interaction: Not supported
Units: FL–2
Description: Nonuniform shear traction on the element reference surface with magnitude and direction supplied via user subroutine UTRACLOAD.
Load ID (*DLOAD): TRVEC
Abaqus/CAE Load/Interaction: Surface traction
Units: FL–2
Description: General traction on the element reference surface.
Load ID (*DLOAD): TRVECNU(S)
Abaqus/CAE Load/Interaction: Not supported
Units: FL–2
Description: Nonuniform general traction on the element reference surface with magnitude and direction supplied via user subroutine UTRACLOAD.
Foundations are specified as described in “Element foundations,” Section 2.2.2.
Load ID (*FOUNDATION): F
Abaqus/CAE Load/Interaction: Elastic foundation
Units: FL–3
Description: Elastic foundation. For MGAX elements the elastic foundations are applied to degrees of freedom and only.
Surface-based distributed loads are specified as described in “Distributed loads,” Section 34.4.3.
Load ID (*DSLOAD): HP
Abaqus/CAE Load/Interaction: Pressure
Units: FL–2
Description: Hydrostatic pressure on the element reference surface and linear in global Z. The pressure is positive in the direction opposite to the surface normal.
Load ID (*DSLOAD): P
Abaqus/CAE Load/Interaction: Pressure
Units: FL–2
Description: Pressure on the element reference surface. The pressure is positive in the direction opposite to the surface normal.
Load ID (*DSLOAD): PNU
Abaqus/CAE Load/Interaction: Pressure
Units: FL–2
Description: Nonuniform pressure on the element reference surface with magnitude supplied via user subroutine DLOAD. The pressure is positive in the direction opposite of the surface normal.
Load ID (*DSLOAD): TRSHR
Abaqus/CAE Load/Interaction: Surface traction
Units: FL–2
Description: Shear traction on the element reference surface.
Load ID (*DSLOAD): TRSHRNU(S)
Abaqus/CAE Load/Interaction: Surface traction
Units: FL–2
Description: Nonuniform shear traction on the element reference surface with magnitude and direction supplied via user subroutine UTRACLOAD.
Load ID (*DSLOAD): TRVEC
Abaqus/CAE Load/Interaction: Surface traction
Units: FL–2
Description: General traction on the element reference surface.
Load ID (*DSLOAD): TRVECNU(S)
Abaqus/CAE Load/Interaction: Surface traction
Units: FL–2
Description: Nonuniform general traction on the element reference surface with magnitude and direction supplied via user subroutine UTRACLOAD.
Surface-based incident wave loads are available. They are specified as described in “Acoustic and shock loads,” Section 34.4.6. If the incident wave field includes a reflection off a plane outside the boundaries of the mesh, this effect can be included.
The default local material directions are such that local material direction 1 lies along the line of the element and local material direction 2 is the hoop direction.
Stress and other tensors (including strain tensors) are available for elements with displacement degrees of freedom. All tensors have the same components. For example, the stress components are as follows:
S11 | Local direct stress. |
S22 | Local direct stress. |
S12 | Local shear stress. Only available for generalized axisymmetric membrane elements. |
Your query was poorly formed. Please make corrections. |
Products: Abaqus/Standard Abaqus/CAE
Your query was poorly formed. Please make corrections. |
This section provides a reference to the axisymmetric membrane elements available in Abaqus/Standard.
Your query was poorly formed. Please make corrections. |
Your query was poorly formed. Please make corrections. |
Coordinate 1 is r, coordinate 2 is z. At , the r-direction corresponds to the global X-direction and the z-direction corresponds to the global Y-direction. This is important when data are required in global directions. Coordinate 1 should be greater than or equal to zero.
Degree of freedom 1 is , degree of freedom 2 is . Generalized axisymmetric elements with twist have an additional degree of freedom, 5, corresponding to the twist angle (in radians).
Abaqus/Standard does not automatically apply any boundary conditions to nodes located along the symmetry axis. You must apply radial or symmetry boundary conditions on these nodes if desired.
Point loads and moments should be given as the value integrated around the circumference; that is, the total value on the ring.
Your query was poorly formed. Please make corrections. |
Your query was poorly formed. Please make corrections. |
Your query was poorly formed. Please make corrections. |
MAX1 | 2-node linear, without twist |
MAX2 | 3-node quadratic, without twist |
Your query was poorly formed. Please make corrections. |
1, 2
Your query was poorly formed. Please make corrections. |
Your query was poorly formed. Please make corrections. |
None.
Your query was poorly formed. Please make corrections. |
Your query was poorly formed. Please make corrections. |
Your query was poorly formed. Please make corrections. |
MGAX1 | 2-node linear, with twist |
MGAX2 | 3-node quadratic, with twist |
Your query was poorly formed. Please make corrections. |
1, 2, 5
Your query was poorly formed. Please make corrections. |
Your query was poorly formed. Please make corrections. |
None.
Your query was poorly formed. Please make corrections. |
Your query was poorly formed. Please make corrections. |
Your query was poorly formed. Please make corrections. |
Your query was poorly formed. Please make corrections. |
R, Z
Your query was poorly formed. Please make corrections. |
Your query was poorly formed. Please make corrections. |
Input File Usage: | *MEMBRANE SECTION |
In addition, use the following option for variable thickness membranes: *NODAL THICKNESS |
Abaqus/CAE Usage: | Property module: Create Section: select Shell as the section Category and Membrane as the section Type |
You cannot define variable thickness membranes in Abaqus/CAE. |
Your query was poorly formed. Please make corrections. |
Your query was poorly formed. Please make corrections. |
Your query was poorly formed. Please make corrections. |
Distributed loads are specified as described in “Distributed loads,” Section 34.4.3.
Load ID (*DLOAD): BR
Abaqus/CAE Load/Interaction: Body force
Units: FL–3
Description: Body force in the radial (1 or r) direction.
Load ID (*DLOAD): BZ
Abaqus/CAE Load/Interaction: Body force
Units: FL–3
Description: Body force in the axial (2 or z) direction.
Load ID (*DLOAD): BRNU
Abaqus/CAE Load/Interaction: Body force
Units: FL–3
Description: Nonuniform body force in the radial direction with magnitude supplied via user subroutine DLOAD.
Load ID (*DLOAD): BZNU
Abaqus/CAE Load/Interaction: Body force
Units: FL–3
Description: Nonuniform body force in the axial direction with magnitude supplied via user subroutine DLOAD.
Load ID (*DLOAD): CENT
Abaqus/CAE Load/Interaction: Not supported
Units: FL–4 (ML–3T–2)
Description: Centrifugal load (magnitude is input as , where is the mass density per unit volume, is the angular velocity). Since only axisymmetric deformation is allowed, the spin axis must be the z-axis.
Load ID (*DLOAD): CENTRIF
Abaqus/CAE Load/Interaction: Rotational body force
Units: T–2
Description: Centrifugal load (magnitude is input as , where is the angular velocity). Since only axisymmetric deformation is allowed, the spin axis must be the z-axis.
Load ID (*DLOAD): GRAV
Abaqus/CAE Load/Interaction: Gravity
Units: LT–2
Description: Gravity loading in a specified direction (magnitude input as acceleration).
Load ID (*DLOAD): HP
Abaqus/CAE Load/Interaction: Not supported
Units: FL–2
Description: Hydrostatic pressure applied to the element reference surface and linear in global Z. The pressure is positive in the direction of the positive element normal.
Load ID (*DLOAD): P
Abaqus/CAE Load/Interaction: Pressure
Units: FL–2
Description: Pressure applied to the element reference surface. The pressure is positive in the direction of the positive element normal.
Load ID (*DLOAD): PNU
Abaqus/CAE Load/Interaction: Not supported
Units: FL–2
Description: Nonuniform pressure applied to the element reference surface with magnitude supplied via user subroutine DLOAD. The pressure is positive in the direction of the positive element normal.
Load ID (*DLOAD): TRSHR
Abaqus/CAE Load/Interaction: Surface traction
Units: FL–2
Description: Shear traction on the element reference surface.
Load ID (*DLOAD): TRSHRNU(S)
Abaqus/CAE Load/Interaction: Not supported
Units: FL–2
Description: Nonuniform shear traction on the element reference surface with magnitude and direction supplied via user subroutine UTRACLOAD.
Load ID (*DLOAD): TRVEC
Abaqus/CAE Load/Interaction: Surface traction
Units: FL–2
Description: General traction on the element reference surface.
Load ID (*DLOAD): TRVECNU(S)
Abaqus/CAE Load/Interaction: Not supported
Units: FL–2
Description: Nonuniform general traction on the element reference surface with magnitude and direction supplied via user subroutine UTRACLOAD.
Your query was poorly formed. Please make corrections. |
Your query was poorly formed. Please make corrections. |
Foundations are specified as described in “Element foundations,” Section 2.2.2.
Load ID (*FOUNDATION): F
Abaqus/CAE Load/Interaction: Elastic foundation
Units: FL–3
Description: Elastic foundation. For MGAX elements the elastic foundations are applied to degrees of freedom and only.
Your query was poorly formed. Please make corrections. |
Your query was poorly formed. Please make corrections. |
Your query was poorly formed. Please make corrections. |
Your query was poorly formed. Please make corrections. |
Surface-based distributed loads are specified as described in “Distributed loads,” Section 34.4.3.
Load ID (*DSLOAD): HP
Abaqus/CAE Load/Interaction: Pressure
Units: FL–2
Description: Hydrostatic pressure on the element reference surface and linear in global Z. The pressure is positive in the direction opposite to the surface normal.
Load ID (*DSLOAD): P
Abaqus/CAE Load/Interaction: Pressure
Units: FL–2
Description: Pressure on the element reference surface. The pressure is positive in the direction opposite to the surface normal.
Load ID (*DSLOAD): PNU
Abaqus/CAE Load/Interaction: Pressure
Units: FL–2
Description: Nonuniform pressure on the element reference surface with magnitude supplied via user subroutine DLOAD. The pressure is positive in the direction opposite of the surface normal.
Load ID (*DSLOAD): TRSHR
Abaqus/CAE Load/Interaction: Surface traction
Units: FL–2
Description: Shear traction on the element reference surface.
Load ID (*DSLOAD): TRSHRNU(S)
Abaqus/CAE Load/Interaction: Surface traction
Units: FL–2
Description: Nonuniform shear traction on the element reference surface with magnitude and direction supplied via user subroutine UTRACLOAD.
Load ID (*DSLOAD): TRVEC
Abaqus/CAE Load/Interaction: Surface traction
Units: FL–2
Description: General traction on the element reference surface.
Load ID (*DSLOAD): TRVECNU(S)
Abaqus/CAE Load/Interaction: Surface traction
Units: FL–2
Description: Nonuniform general traction on the element reference surface with magnitude and direction supplied via user subroutine UTRACLOAD.
Your query was poorly formed. Please make corrections. |
Your query was poorly formed. Please make corrections. |
Surface-based incident wave loads are available. They are specified as described in “Acoustic and shock loads,” Section 34.4.6. If the incident wave field includes a reflection off a plane outside the boundaries of the mesh, this effect can be included.
Your query was poorly formed. Please make corrections. |
Your query was poorly formed. Please make corrections. |
Your query was poorly formed. Please make corrections. |
The default local material directions are such that local material direction 1 lies along the line of the element and local material direction 2 is the hoop direction.
Your query was poorly formed. Please make corrections. |
Stress and other tensors (including strain tensors) are available for elements with displacement degrees of freedom. All tensors have the same components. For example, the stress components are as follows:
S11 | Local direct stress. |
S22 | Local direct stress. |
S12 | Local shear stress. Only available for generalized axisymmetric membrane elements. |
Your query was poorly formed. Please make corrections. |
Your query was poorly formed. Please make corrections. |
STH | Current thickness. |
Your query was poorly formed. Please make corrections. |
Your query was poorly formed. Please make corrections. |
Your query was poorly formed. Please make corrections. |
Your query was poorly formed. Please make corrections. |
Your query was poorly formed. Please make corrections. |
Your query was poorly formed. Please make corrections. |
Your query was poorly formed. Please make corrections. |