*Heading
*Node
    101,         300.,           0.
    102,       306.25,           0.
    103,        312.5,           0.
    104,       318.75,           0.
    105,         325.,           0.
    201,         300.,          20.
    202,       306.25,          20.
    203,        312.5,          20.
    204,       318.75,          20.
    205,         325.,          20.
    301,         300.,          40.
    302,       306.25,          40.
    303,        312.5,          40.
    304,       318.75,          40.
    305,         325.,          40.
    401,         300.,          60.
    402,       306.25,          60.
    403,        312.5,          60.
    404,       318.75,          60.
    405,         325.,          60.
    501,         300.,          80.
    502,       306.25,          80.
    503,        312.5,          80.
    504,       318.75,          80.
    505,         325.,          80.
   1505,       306.25,           0.
   1506,       306.25,          40.
   1507,       318.75,           0.
   1508,       318.75,          40.
   1509,       306.25,          40.
   1510,       306.25,          80.
   1511,       318.75,          40.
   1512,       318.75,          80.
*Element, type=CAX4RT
100, 101, 103, 303, 301
101, 103, 105, 305, 303
200, 301, 303, 503, 501
201, 303, 305, 505, 503
*Elset, elset=EALL
 100, 101, 200, 201
**Elset, elset=_I1, internal
** 100, 101, 200, 201
** Section: Section-1-EALL
*Solid Section, elset=EALL, material=A1
1.,
*ORIENTATION,NAME=REBAR1,DEFINITION=OFFSET TO NODES
2,4
3
*ELEMENT,TYPE=SFMAX1,ELSET=SFMAX1-1
1201,1505,1506
1202,1507,1508
1203,1509,1510
1204,1511,1512
*SURFACE SECTION,ELSET=SFMAX1-1
*REBAR LAYER
REBAR1,0.300000,0.500000,0.000000,STEEL,-45.000000,1
*EMBEDDED ELEMENT,HOST ELSET=EALL
1201,
1202,
1203,
1204,
*Nset, nset=BOT, generate
 101,  105,    1
*Nset, nset=LEFT, generate
 101,  501,  100
*Nset, nset=NALL 
 101, 102, 103, 104, 105, 201, 202, 203, 204, 205, 301, 302, 303, 304, 305, 401
 402, 403, 404, 405, 501, 502, 503, 504, 505
*Nset, nset=RIGHT, generate
 105,  505,  100
*Nset, nset=TOP, generate
 501,  505,    1
*Elset, elset=ELOAD
 100, 200
*elset,elset=flux
100,101
**Elset, elset=_DISTFORCE-1_S4, internal, instance=PART-1-1
** 100, 200
*Surface, type=ELEMENT, name=DISTFORCE-1
ELOAD, S4
** 
** MATERIALS
** 
*Material, name=A1
*Elastic
5000., 0.3
*EXPANSION
11.E-6, 
*DENSITY
7800.,  
*conductivity
50.
*specific heat
460.
*Material, name=STEEL
*Elastic
250000.,0.
** 
** BOUNDARY CONDITIONS
** 
** Name: Disp-BC-1 Type: Displacement/Rotation
*Boundary
BOT, 1, 1
BOT, 2, 2
BOT, 3, 3
BOT, 4, 4
BOT, 5, 5
BOT, 6, 6
** Name: Disp-BC-2 Type: Symmetry/Antisymmetry/Encastre
*Boundary
TOP, YSYMM
*initial conditions,type=temperature
nall,20.
** ----------------------------------------------------------------
** 
** STEP: Step-1
** 
*Step, name=Step-1, nlgeom,amplitude=ramp
*coupled temperature-displacement,deltmx=10.0
0.2, 1., 1E-05, 1.
** 
** LOADS
** 
** Name: DISTFORCE-1   Type: Pressure
*Dsload
DISTFORCE-1, P, 10.
*dflux
flux,S1,1.e10
** 
** OUTPUT REQUESTS
** 
*Restart, write, frequency=10
** 
** FIELD OUTPUT: F-Output-1
** 
*Output, field,var=preselect
*Node Output
U, 
*nset,nset=qa_test_nset
nall,
*output,field,freq=9999
*node output,nset=qa_test_nset
nt,
*Output, history, frequency=0
*El Print, freq=999999
*Node Print, freq=999999
*End Step