*Heading
** Job name: driveshaft Model name: Driveshaft
*Preprint, echo=NO, model=NO, history=NO, contact=NO
**
** PARTS
**
*Part, name=Centershaft
*End Part
**  
*Part, name=Inputshaft
*End Part
**  
*Part, name=Outputshaft
*End Part
**  
**
** ASSEMBLY
**
*Assembly, name=Assembly
**  
*Instance, name=Centershaft-1, part=Centershaft
          0.,           0.,           0.
          0.,           0.,           0.,           0.,           0.,           1., 20.0000001027497
*Node
      1,           0.,           0.,           0.
      2,   3.33333325,           0.,           0.
      3,   6.66666651,           0.,           0.
      4,          10.,           0.,           0.
*Element, type=B31H
1, 1, 2
2, 2, 3
3, 3, 4
** Region: (shaft_section:Picked), (Beam Orientation:Picked)
*Elset, elset=_PickedSet2, internal, generate
 1,  3,  1
** Section: shaft_section  Profile: Profile-1
*Beam General Section, elset=_PickedSet2, poisson = 0.3, density=7000., section=CIRC
0.1
0.,0.,-1.
 2e+11, 7.6e+10
*End Instance
**  
*Instance, name=Inputshaft-1, part=Inputshaft
          0.,           0.,           0.
          0.,           0.,           0.,           0.,           0.,           1., 20.0000001027497
*Node
      1,  -6.57784796,   2.39414096,           0.
      2,  -3.28892398,   1.19707048,           0.
      3,           0.,           0.,           0.
*Element, type=B31H
1, 1, 2
2, 2, 3
** Region: (shaft_section:Picked), (Beam Orientation:Picked)
*Elset, elset=_PickedSet2, internal
 1, 2
** Section: shaft_section  Profile: Profile-1
*Beam General Section, elset=_PickedSet2, poisson = 0.3, density=7000., section=CIRC
0.1
0.,0.,-1.
 2e+11, 7.6e+10
*End Instance
**  
*Instance, name=Outputshaft-1, part=Outputshaft
          0.,           0.,           0.
          0.,           0.,           0.,           0.,           0.,           1., 20.0000001027497
*Node
      1,          10.,           0.,           0.
      2,   13.2889242,  -1.19707048,           0.
      3,   16.5778484,  -2.39414096,           0.
*Element, type=B31H
1, 1, 2
2, 2, 3
** Region: (shaft_section:Picked), (Beam Orientation:Picked)
*Elset, elset=_PickedSet2, internal
 1, 2
** Section: shaft_section  Profile: Profile-1
*Beam General Section, elset=_PickedSet2, poisson = 0.3, density=7000., section=CIRC
0.1
0.,0.,-1.
 2e+11, 7.6e+10
*End Instance
**  
*Nset, nset=_PickedSet8, internal, instance=Inputshaft-1
 1,
*Nset, nset=QA_TEST, internal, instance=Inputshaft-1
 1,
*Nset, nset=_PickedSet9, internal, instance=Outputshaft-1
 3,
*Nset, nset=_PickedSet18, internal, instance=Outputshaft-1
 3,
*Distribution, name=distOriA, table=distTableOri, location=element
      , 1.0 ,0.0, 0.0,  0.0, 1.0, 0.0
 1, -0.342020143325669, 0.939692620785908,           0., 0.939692620785908, 0.342020143325669,           0.
 2, -3.2578679309834e-07,  -1.15086532304069e-07, 0.99999999999994, 0.99999999999994,  -1.15086607291437e-07,  3.25786779853421e-07
*Orientation, name="Datum csys-A"
 distOriA
 1, 0.
*Orientation, name="Datum csys-B"
 distOriB
 1, 0.
*Distribution, name=distOriB, table=distTableOri, location=element
      , 1.0 ,0.0, 0.0,  0.0, 1.0, 0.0
 1, 0.,           1.,           0.,           1.,           0.,           0.
 2, 0.,           0.,           1., 0.939692620785908, 0.342020143325669,           0.
** 
** CONNECTORS
** 
*Element, type=CONN3D2, elset=_Connector_centershaft_outputshaft_CnSet_
 1, Centershaft-1.4, Outputshaft-1.1
*Element, type=CONN3D2, elset=_Connector_inputshaft_centershaft_CnSet_
 2, Inputshaft-1.3, Centershaft-1.1
*Elset, Elset=connectors
 1, 2
*Connector Section, elset=connectors
 UJoint,
 "Datum csys-A", "Datum csys-B"
*End Assembly
*Distribution Table, name=distTableOri
 coord3d, coord3d
** ----------------------------------------------------------------
** 
** STEP: Step-1
** 
*Step, name=Step-1, nlgeom=YES
*Static
0.1, 1., 1e-05, 1.
** 
** BOUNDARY CONDITIONS
** 
** Name: BC-1 Type: Displacement/Rotation
*Boundary
_PickedSet8, 1, 1
_PickedSet8, 2, 2
_PickedSet8, 3, 3
_PickedSet8, 4, 4, 6.28
_PickedSet8, 5, 5
_PickedSet8, 6, 6
** Name: BC-2 Type: Displacement/Rotation
*Boundary
_PickedSet9, 1, 1
_PickedSet9, 2, 2
_PickedSet9, 3, 3
_PickedSet9, 5, 5
_PickedSet9, 6, 6
** 
** LOADS
** 
** Name: Load-1   Type: Moment
*Cload
_PickedSet18, 4, 1000.
** 
** OUTPUT REQUESTS
** 
*Restart, write, frequency=0
** 
** FIELD OUTPUT: F-Output-1
** 
*OUTPUT,field, freq=10000
*NODE OUTPUT, nset=QA_TEST
u,
** 
** HISTORY OUTPUT: H-Output-1
** 
*OUTPUT, history
*node output, nset=QA_TEST
ur1,
*El Print, freq=999999
*Node Print, freq=999999
*End Step