*Heading
** Job name: Job-2 Model name: Model-1
** ----------------------------------------------------------------
** 
** PART INSTANCE: SOLID
** 
*Parameter
shape=0.0
dp=1.0
c1=80.0*dp
*Dsa Controls, Tol=5.E-6
*Design Parameter
shape,dp
*Parameter Shape Variation, parameter=shape
7, 0.0, 1.0, 0.0
9, 0.0, 1.0, 0.0
*System
          0.,        -0.1,          0.,          1.,        -0.1,          0.
*Node
      1,           0.,           0.
      2,           1.,           0.
      3,           2.,           0.
      4,           0.,           1.
      5,           1.,           1.
      6,           2.,           1.
      7,           0.,           2.
      8,           1.,           2.
      9,           2.,           2.
*Element, type=CPE4
1, 1, 2, 5, 4
2, 2, 3, 6, 5
3, 4, 5, 8, 7
4, 5, 6, 9, 8
*Elset, elset=solid, generate
 1,  4,  1
** Section: Section-1
*Solid Section, elset=solid, material=hyper
1.,
** ----------------------------------------------------------------
** 
** PART INSTANCE: RIGID DIE
** 
*System
          0.,     2.85235,          0.,          1.,     2.85235,          0.
*Node
     20,           1.,     -0.85235
*System
** 
** MATERIALS
** 
*Material, name=hyper
*Hyperelastic
<c1>,   20., 0.001
** 
** INTERACTION PROPERTIES
** 
*Surface Interaction, name=IntProp-1
*Surface, type=SEGMENTS, name=master
START,           3.,       2.3523
CIRCL,          -1.,       2.3523,           1.,       7.8523
*rigid body, analytical surface=master, ref=20
*Elset, elset=top_solid
 3, 4
*Surface, type=elem,name=slave
top_solid, S3
*Contact Pair, interaction=IntProp-1, small sliding
slave,master
** ----------------------------------------------------------------
*nset,nset=bc
1,2,3,20
** 
** STEP: Step-1
** 
*Step, nlgeom, dsa
Step-1
*Static
0.1, 1.,
*Boundary
1,1,2
2,2,2
3,2,2
20,1,1,0.0
20,6,6,0.0
20,2,2,-0.3 
*design response, freq=6
*node response
u
*node response,nset=bc
rf
*element response
s
*contact response
cstress,cdisp
*output,field, freq=6
*node output
u
*node output,nset=bc
rf
*element output
s
*contact output
cstress,cdisp
*End Step