*Heading ** Job name: refined_flow Model name: Model-1 ** Generated by: Abaqus/CAE 6.10-DEV *Preprint, echo=NO, model=NO, history=NO, contact=NO Tests convection of heat due to flow in soils analysis using coupled temperature-pore-displacement element Should get same temperature profile as one_d_convection problem that uses DCC elements ** ** PARTS ** *Part, name=Part-1 *Node 1, 0., 0., 10. 2, 0., 10., 10. 3, 0., 0., 0. 4, 0., 10., 0. 5, 1.75, 0., 10. 6, 1.75, 10., 10. 7, 1.75, 0., 0. 8, 1.75, 10., 0. 9, 3.5, 0., 10. 10, 3.5, 10., 10. 11, 3.5, 0., 0. 12, 3.5, 10., 0. 13, 5.25, 0., 10. 14, 5.25, 10., 10. 15, 5.25, 0., 0. 16, 5.25, 10., 0. 17, 7., 0., 10. 18, 7., 10., 10. 19, 7., 0., 0. 20, 7., 10., 0. 21, 8.75, 0., 10. 22, 8.75, 10., 10. 23, 8.75, 0., 0. 24, 8.75, 10., 0. 25, 10.5, 0., 10. 26, 10.5, 10., 10. 27, 10.5, 0., 0. 28, 10.5, 10., 0. 29, 12.25, 0., 10. 30, 12.25, 10., 10. 31, 12.25, 0., 0. 32, 12.25, 10., 0. 33, 14., 0., 10. 34, 14., 10., 10. 35, 14., 0., 0. 36, 14., 10., 0. 37, 15.75, 0., 10. 38, 15.75, 10., 10. 39, 15.75, 0., 0. 40, 15.75, 10., 0. 41, 17.5, 0., 10. 42, 17.5, 10., 10. 43, 17.5, 0., 0. 44, 17.5, 10., 0. 45, 19.25, 0., 10. 46, 19.25, 10., 10. 47, 19.25, 0., 0. 48, 19.25, 10., 0. 49, 21., 0., 10. 50, 21., 10., 10. 51, 21., 0., 0. 52, 21., 10., 0. 53, 22.75, 0., 10. 54, 22.75, 10., 10. 55, 22.75, 0., 0. 56, 22.75, 10., 0. 57, 24.5, 0., 10. 58, 24.5, 10., 10. 59, 24.5, 0., 0. 60, 24.5, 10., 0. 61, 26.25, 0., 10. 62, 26.25, 10., 10. 63, 26.25, 0., 0. 64, 26.25, 10., 0. 65, 28., 0., 10. 66, 28., 10., 10. 67, 28., 0., 0. 68, 28., 10., 0. 69, 29.75, 0., 10. 70, 29.75, 10., 10. 71, 29.75, 0., 0. 72, 29.75, 10., 0. 73, 31.5, 0., 10. 74, 31.5, 10., 10. 75, 31.5, 0., 0. 76, 31.5, 10., 0. 77, 33.25, 0., 10. 78, 33.25, 10., 10. 79, 33.25, 0., 0. 80, 33.25, 10., 0. 81, 35., 0., 10. 82, 35., 10., 10. 83, 35., 0., 0. 84, 35., 10., 0. *Element, type=C3D8PT 1, 5, 6, 8, 7, 1, 2, 4, 3 2, 9, 10, 12, 11, 5, 6, 8, 7 3, 13, 14, 16, 15, 9, 10, 12, 11 4, 17, 18, 20, 19, 13, 14, 16, 15 5, 21, 22, 24, 23, 17, 18, 20, 19 6, 25, 26, 28, 27, 21, 22, 24, 23 7, 29, 30, 32, 31, 25, 26, 28, 27 8, 33, 34, 36, 35, 29, 30, 32, 31 9, 37, 38, 40, 39, 33, 34, 36, 35 10, 41, 42, 44, 43, 37, 38, 40, 39 11, 45, 46, 48, 47, 41, 42, 44, 43 12, 49, 50, 52, 51, 45, 46, 48, 47 13, 53, 54, 56, 55, 49, 50, 52, 51 14, 57, 58, 60, 59, 53, 54, 56, 55 15, 61, 62, 64, 63, 57, 58, 60, 59 16, 65, 66, 68, 67, 61, 62, 64, 63 17, 69, 70, 72, 71, 65, 66, 68, 67 18, 73, 74, 76, 75, 69, 70, 72, 71 19, 77, 78, 80, 79, 73, 74, 76, 75 20, 81, 82, 84, 83, 77, 78, 80, 79 *Nset, nset=_PickedSet2, internal, generate 1, 84, 1 *Elset, elset=_PickedSet2, internal, generate 1, 20, 1 ** Section: Section-1 *Solid Section, elset=_PickedSet2, material=Material-1 , *End Part ** ** ** ASSEMBLY ** *Assembly, name=Assembly ** *Instance, name=Part-1-1, part=Part-1 *End Instance ** *nset, nset=nall, generate, instance=Part-1-1 1, 84, 1 *nset, nset=one, generate, instance=Part-1-1 1, 4, 1 *nset, nset=end, generate, instance=Part-1-1 81,84,1 *End Assembly ** ** MATERIALS ** *Material, name=Material-1 *ELASTIC 100000., 0.3 *DENSITY 2., *Density, pore fluid 2.0, *PERMEABILITY,SPECIFIC=1e-06 1e-05, *EXPANSION 0.001, *Expansion, Pore fluid 0.001 *CONDUCTIVITY 3.770, *SPECIFIC HEAT .39, *Specific Heat, pore fluid 0.39 *Conductivity, pore fluid 3.770, *INITIAL CONDITIONS,TYPE=RATIO nall,1. *Initial Conditions, type=pore pressure, user *Initial Conditions, type=temperature one, 50.0 *Boundary nall,1,3,0.0 ** ---------------------------------------------------------------- ** ** STEP: Step-1 ** *Step, name=Step-1, nlgeom=yes, unsymm=yes, amplitude=ramp, inc=10000 *Soils, consolidation 0.1, 40., 0.1, 1. ** ** OUTPUT REQUESTS ** *Restart, write, frequency=0 ** ** FIELD OUTPUT: F-Output-1 ** *Output, field, variable=PRESELECT ** ** HISTORY OUTPUT: H-Output-1 ** *Output, history, variable=PRESELECT *Output, field *Node output POR NT *Element Output FLVEL *Boundary,user Nall,8,8,1.0 *Boundary one,11,11,50.0 end,11,11,0.0 *End Step