*Heading
*Node
    101,         300.,           0.
    102,       306.25,           0.
    103,        312.5,           0.
    104,       318.75,           0.
    105,         325.,           0.
    201,         300.,          20.
    202,       306.25,          20.
    203,        312.5,          20.
    204,       318.75,          20.
    205,         325.,          20.
    301,         300.,          40.
    302,       306.25,          40.
    303,        312.5,          40.
    304,       318.75,          40.
    305,         325.,          40.
    401,         300.,          60.
    402,       306.25,          60.
    403,        312.5,          60.
    404,       318.75,          60.
    405,         325.,          60.
    501,         300.,          80.
    502,       306.25,          80.
    503,        312.5,          80.
    504,       318.75,          80.
    505,         325.,          80.
   1505,       306.25,           0.
   1506,       306.25,          40.
   1507,       318.75,           0.
   1508,       318.75,          40.
   1509,       306.25,          40.
   1510,       306.25,          80.
   1511,       318.75,          40.
   1512,       318.75,          80.
*Element, type=DCAX4
100, 101, 103, 303, 301
101, 103, 105, 305, 303
200, 301, 303, 503, 501
201, 303, 305, 505, 503
*Elset, elset=EALL
 100, 101, 200, 201
**Elset, elset=_I1, internal
** 100, 101, 200, 201
** Section: Section-1-EALL
*Solid Section, elset=EALL, material=A1
1.,
*Nset, nset=BOT, generate
 101,  105,    1
*Nset, nset=LEFT, generate
 101,  501,  100
*Nset, nset=NALL 
 101, 102, 103, 104, 105, 201, 202, 203, 204, 205, 301, 302, 303, 304, 305, 401
 402, 403, 404, 405, 501, 502, 503, 504, 505
*Nset, nset=RIGHT, generate
 105,  505,  100
*Nset, nset=TOP, generate
 501,  505,    1
*elset,elset=flux
100,101
**Elset, elset=_DISTFORCE-1_S4, internal, instance=PART-1-1
** 100, 200
** 
** MATERIALS
** 
*Material, name=A1
*Elastic
5000., 0.3
*EXPANSION
11.E-6, 
*DENSITY
7800.,  
*conductivity
50.
*specific heat
460.
** 
** BOUNDARY CONDITIONS
** 
** Name: Disp-BC-2 Type: Symmetry/Antisymmetry/Encastre
*Boundary
TOP, YSYMM
*initial conditions,type=temperature
nall,20.
** ----------------------------------------------------------------
** 
** STEP: Step-1
** 
*Step, name=Step-1
*heat transfer,deltmx=10.0
0.2, 1., 1E-05, 1.
** 
** LOADS
** 
*dflux
flux,S1,1.e10
** 
** OUTPUT REQUESTS
** 
*Restart, write, frequency=10
** 
** FIELD OUTPUT: F-Output-1
** 
*Output, field,var=preselect
*nset,nset=qa_test_nset
nall,
*output,field,freq=9999
*node output,nset=qa_test_nset
nt,
*End Step