This section summarizes the changes and the additions that have been made to output variable identifiers used in Abaqus.
Element integration point variables: | ||
| new | (S)(E) | MMIXDME |
Mode mix ratio during damage evolution. | ||
| new | (S)(E) | MMIXDMI |
Mode mix ratio at damage initiation. | ||
| new | (E) | PEEQR |
Equivalent plastic strain rate. | ||
Whole element variables: | ||
| new | (S) | ALEAKVRBXFEM |
Accumulated leak-off flow volume at the bottom cracked surface of the enriched element. | ||
| new | (S) | ALEAKVRTXFEM |
Accumulated leak-off flow volume at the top cracked surface of the enriched element. | ||
| new | (S) | GFVRXFEM |
Gap fluid volume rate of the enriched element. | ||
| new | (S) | LEAKVRBXFEM |
Leak-off flow rate at the bottom cracked surface of the enriched element. | ||
| new | (S) | LEAKVRTXFEM |
Leak-off flow rate at the top cracked surface of the enriched element. | ||
| new | (S) | PFOPENXFEM |
Fracture opening of the enriched element. | ||
| new | (S) | PORPRES |
Fluid pressure of the enriched element. | ||
Nodal variables: | ||
| new | (E) | AMAG |
Magnitude of translational accelerations. | ||
| new | (S) | CLINELOAD |
Contact load due to line contact from edge-to-surface and radial edge-to-edge constraints in units of force per length. The normal (CLINELOADN) and frictional shear (CLINELOADT) components are available only for general contact to the .odb file. | ||
| new | (S) | CPOINTLOAD |
Contact load in units of force due to point contact from edge-to-edge constraints using the cross formulation. The normal (CPOINTLOADN) and frictional shear (CPOINTLOADT) components are available only for general contact to the .odb file. | ||
| new | (E) | RFMAG |
Magnitude of reaction forces. | ||
| new | (E) | UMAG |
Magnitude of translational displacements. | ||
| new | (E) | VMAG |
Magnitude of translational velocities. | ||
Surface variables-nodal quantities: | ||
| new | (S) | CRKDISP |
Crack opening and relative tangential motions on cracked surfaces in enriched elements. | ||
| mod | (S) | CSDMG |
Damage variable for cracked surfaces in enriched elements. | ||
Total energy output quantities: | ||
| new | (S) | ALLCCDW |
Contact constraint discontinuity work. | ||
| new | (S) | ALLCCE |
The sum of ALLCCEN and ALLCCET. | ||
| new | (S) | ALLCCEN |
Contact constraint elastic energy in normal direction due to penalty constraint enforcement. | ||
| new | (S) | ALLCCET |
Contact constraint elastic energy in tangential direction due to friction penalty constraint enforcement. | ||
| new | (S) | ALLCCSD |
The sum of ALLCCSDN and ALLCCSDT. | ||
| new | (S) | ALLCCSDN |
Contact constraint stabilization dissipation in normal direction. | ||
| new | (S) | ALLCCSDT |
Contact constraint stabilization dissipation in tangential direction. | ||
State and field variables: | ||
| rem | (C) | ENSTROPHY |
Enstrophy per unit mass. | ||
| rem | (C) | HELICITY |
Dot product of vorticity and velocity. | ||
| new | (C) | QCRIT |
Coherent structure visualizator, known as Qcriteria. | ||
Turbulence variables: | ||
| new | (C) | TURBOMEGA |
Specific turbulent energy dissipation rate. | ||
| new | (C) | TURBVISCOSITYRATIO |
Eddy to molecular viscosity ratio. | ||