| Section 4.1 | The AMS eigensolver can extract coupled structural-acoustic eigenmodes |
| Section 4.2 | AMS eigensolver performance improvements |
| Section 4.3 | Specifying additional volume in a fluid cavity |
| Section 4.5 | Matrix quality check |
| Section 4.6 | Flexible body generation |
| Section 5.2 | Enhancements to the XFEM-based crack propagation capability |
| Section 5.3 | SIMULIA Co-Simulation Engine API availability |
| Section 5.8 | Vehicle ride comfort and durability co-simulation |
| Section 5.9 | Logical-Physical co-simulation using Abaqus and Dymola |
| Section 5.10 | Enhancements to the SIMULIA Co-Simulation Engine |
| Section 5.11 | Enhancements for co-simulation |
| Section 5.12 | MpCCI connector to the SIMULIA Co-Simulation Engine |
| Section 6.1 | Enhancements to parallel rheological framework |
| Section 6.3 | Enhancements to creep models |
| Section 6.4 | User-defined frequency domain viscoelastic behavior |
| Section 6.5 | New hybrid formulations for user-defined material behavior |
| Section 6.6 | Different stiffness in tension versus compression for traction-separation elasticity |
| Section 6.7 | Element deletion controlled by state variables |
| Section 7.2 | Linear pyramid acoustic element |
| Section 8.1 | Initial conditions on damage initiation |
| Section 8.3 | Acoustic base motion for SIM-based procedures |
| Section 9.1 | New attachment method for mesh-independent fasteners |
| Section 10.1 | Edge-to-edge contact for general contact in Abaqus/Standard |
| Section 11.1 | GPGPU acceleration of the AMS eigensolver |
| Section 11.2 | GPGPU accelerated direct equation solver |
| Section 11.4 | Job execution control enhancements |
| Section 11.5 | SIM database utilities |
| Section 11.6 | Enhancements for translating Abaqus data to modal neutral files |
| Section 12.1 | Writing results from an Abaqus analysis to a SIM database |
| Section 12.2 | Output of mode mix ratios during mixed mode delamination |
| Section 12.3 | Output of last converged increment |
| Section 12.4 | Output of contact-related energies |
| Section 13.4 | Allocatable arrays |
| Section 13.5 | Parallel user subroutines |